COMPARISON · 5 SPECIFICATIONS

Booster K1 vs Booster T2

Booster K1 (Booster Robotics) and Booster T2 (Booster Robotics) are both compact humanoid robots. The table sets side by side the 5 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH · 23 OCT 2026

SIDE BY SIDE

Official source
Community measured
Not published

Open in the comparison tool to add, swap or remove robots, choose a configuration and see every specification they publish.

SPECIFICATION	Booster K1Booster Robotics Status: SHIPPING	Booster T2Booster Robotics Status: SHIPPING
Height	~95 cmOfficial source [1]	~1.4 m (140 cm)Official source [2]
Weight	~19.5 kgOfficial source [1]	~42 kgOfficial source [2]
Degrees of freedom	22 (6 per leg, 4 per arm, 2 head)Official source [1]	31 (6 per leg, 7 per arm, 3 waist, 2 head)Official source [2]
Runtime	20 min (2 Ah, Geek) / 1 h 10 min (5 Ah, Education and Professional), walking at 1.1 m/sOfficial source [1]	2 h continuous walkingOfficial source [2]
Battery	2 Ah (Geek) / 5 Ah (Education, Professional)Official source [1]	48 V, 10 AhOfficial source [2]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

HARDWARE · AFFILIATE LINKS

Hardware named on this page

NVIDIA Jetson AGX Thor Developer Kit Bundle at Seeed StudioNamed in Booster T2's specifications (Compute): Jetson Thor

Listed because this page names the model; being named is not evidence that a product is compatible with, or identical to, what a robot uses. Affiliate links: if you buy through one, Seeed Studio may pay WBH a commission, at no extra cost to you. It plays no part in what WBH covers or names. How recommendations are chosen.