Skip to content
WE BUILDHUMANOIDS

COMPARISON · 6 SPECIFICATIONS

AGIBOT Genie G2 vs HMND 01 Alpha Wheeled

AGIBOT Genie G2 (AGIBOT) and HMND 01 Alpha Wheeled (Humanoid) are both wheeled humanoid robots. The table sets side by side the 6 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH ·

SIDE BY SIDE

  • Official source
  • Community measured
  • Not published

Open in the comparison tool to add, swap or remove robots, choose a configuration and see every specification they publish.

SPECIFICATIONAGIBOT Genie G2AGIBOT Status: SHIPPINGHMND 01 Alpha WheeledHumanoid Status: PILOT
Height1225-1795 mmOfficial source [1]220 cmOfficial source [2]
Weight185 kgOfficial source [1]300 kgOfficial source [2]
Degrees of freedom25 (excluding end effectors)Official source [1]29 active DoF excluding end-effectorsOfficial source [3]
Chassis speedMax 1.5 m/sOfficial source [1]Max 2 m/s (omnidirectional wheeled base, 7.2 km/h)Official source [2]
RuntimeApprox. 4 hOfficial source [1]4 h averageOfficial source [2]
ComputeStandard: 500 TOPS (INT8), 64 GB; High-compute: 2070 TFLOPS (FP4), 128 GBOfficial source [1]NVIDIA compute (model not stated on product page)Official source [2]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

IN SHORT

Which is heavier, the AGIBOT Genie G2 or the Humanoid HMND 01 Alpha Wheeled?
The Humanoid HMND 01 Alpha Wheeled: 300 kg, against 185 kg for the AGIBOT Genie G2, as their makers publish them.