COMPARISON · 5 SPECIFICATIONS

AGIBOT Genie G1 vs Astribot S1

AGIBOT Genie G1 (AGIBOT) and Astribot S1 (Astribot) are both wheeled humanoid robots. The table sets side by side the 5 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH · 14 OCT 2026

SIDE BY SIDE

Official source
Community measured
Not published

SPECIFICATION	AGIBOT Genie G1AGIBOT Status: SHIPPING	Astribot S1Astribot Status: SHIPPING
Height	130-180 cm (adjustable)Official source [1]	170 cmOfficial source [2]
Weight	150 kgOfficial source [1]	80 kgOfficial source [2]
Degrees of freedom	20 excluding end-effector (spec table); page text also says 26 DOFsOfficial source [1]	7 per arm (total not published)Official source [2]
Runtime	4 h+Official source [1]	4-6 h; supports plug-in powerOfficial source [2]
Arm payload	3 kg continuous, one armOfficial source [1]	5 kg per arm (horizontal reach)Official source [2]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

HARDWARE · AFFILIATE LINKS

Hardware named on this page

NVIDIA Jetson AGX Orin 64GB Developer Kit Bundle at Seeed StudioNamed in AGIBOT Genie G1's specifications (Compute): Jetson AGX Orin

Listed because this page names the model; being named is not evidence that a product is compatible with, or identical to, what a robot uses. Affiliate links: if you buy through one, Seeed Studio may pay WBH a commission, at no extra cost to you. It plays no part in what WBH covers or names. How recommendations are chosen.