Which is taller, the AGIBOT A3 or the AGIBOT X2?

The AGIBOT A3: 1.73 m, against ~1.31 m for the AGIBOT X2, as their makers publish them.

COMPARISON · 4 SPECIFICATIONS

AGIBOT A3 vs AGIBOT X2

AGIBOT A3 (AGIBOT) and AGIBOT X2 (AGIBOT) are both full-size humanoid robots. The table sets side by side the 4 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH · 01 NOV 2026

SIDE BY SIDE

Official source
Community measured
Not published

Open in the comparison tool to add, swap or remove robots, choose a configuration and see every specification they publish.

SPECIFICATION	AGIBOT A3AGIBOT Status: SHIPPING	AGIBOT X2AGIBOT Status: SHIPPING
Height	173 cmOfficial source [1]	≈1.31 mOfficial source [2][3]
Weight	55 kgOfficial source [1]	≈39 kg · ≈33 kg (X2 EDU) · ≈35 kg (X2 Neo)Official source [2][3][4]
Runtime	Up to 10 h (maximum endurance)Official source [1]	≈2 hOfficial source [3][5]
Battery	Dual battery packs, 1152 WhOfficial source [1]	≈421 WhOfficial source [3]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

IN SHORT

Which is taller, the AGIBOT A3 or the AGIBOT X2?: The AGIBOT A3: 1.73 m, against ~1.31 m for the AGIBOT X2, as their makers publish them.

HARDWARE · AFFILIATE LINKS

Hardware named on this page

NVIDIA Jetson Orin NX Module 16GB at Seeed StudioNamed in AGIBOT X2's specifications (Compute): Jetson Orin NX

Listed because this page names the model; being named is not evidence that a product is compatible with, or identical to, what a robot uses. Affiliate links: if you buy through one, Seeed Studio may pay WBH a commission, at no extra cost to you. It plays no part in what WBH covers or names. How recommendations are chosen.