COMPARISON · 6 SPECIFICATIONS
NEO vs Unitree G1-Comp
NEO (1X Technologies) and Unitree G1-Comp (Unitree Robotics) are both full-size humanoid robots. The table sets side by side the 6 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.
PUBLISHED BY WBH ·
SIDE BY SIDE
- Official source
- Community measured
- Not published
| SPECIFICATION | NEO1X Technologies Status: ANNOUNCED | Unitree G1-CompUnitree Robotics Status: ANNOUNCED |
|---|---|---|
| Height | 5’6” (as published; approx. 1.68 m) | about 130cm |
| Weight | 66 lb (as published; approx. 30 kg) | about 35kg |
| Degrees of freedom | Hands 22x2, Arms 7x2, Neck 3, Spine 2, Legs 6x2 (as listed; 1X does not state a total) | 25 |
| Runtime | 4 h | About 2 hours |
| Battery | 842 Wh | 9000mAh |
| Compute | 1X NEO Cortex (NVIDIA Jetson Thor), up to 2070 FP4 TFLOPS | 100TOPS |
Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.
HARDWARE · AFFILIATE LINKS
Hardware named on this page
- NVIDIA Jetson AGX Thor Developer Kit Bundle at Seeed StudioNamed in NEO's specifications (Compute): Jetson Thor
Listed because this page names the model; being named is not evidence that a product is compatible with, or identical to, what a robot uses. Affiliate links: if you buy through one, Seeed Studio may pay WBH a commission, at no extra cost to you. It plays no part in what WBH covers or names. How recommendations are chosen.