COMPARISON · 6 SPECIFICATIONS

NEO vs AGIBOT A3 Ultra

NEO (1X Technologies) and AGIBOT A3 Ultra (AGIBOT) are both full-size humanoid robots. The table sets side by side the 6 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH · 06 NOV 2026

SIDE BY SIDE

Official source
Community measured
Not published

Open in the comparison tool to add, swap or remove robots, choose a configuration and see every specification they publish.

SPECIFICATION	NEO1X Technologies Status: ANNOUNCED	AGIBOT A3 UltraAGIBOT Status: SHIPPING
Height	5’6” (as published; approx. 1.68 m)Official source [1]	1.74 mOfficial source [2]
Weight	66 lb (as published; approx. 30 kg)Official source [1]	60 kgOfficial source [2]
Degrees of freedom	Hands 22x2, Arms 7x2, Neck 3, Spine 2, Legs 6x2 (as listed; 1X does not state a total)Official source [1]	51 activeOfficial source [2]
Runtime	4 hOfficial source [1]	Up to 8 h combined operating timeOfficial source [2]
Arm payload	18 lb (as published)Official source [1]	5 kg per armOfficial source [2]
Compute	1X NEO Cortex (NVIDIA Jetson Thor), up to 2070 FP4 TFLOPSOfficial source [1]	NVIDIA ThorOfficial source [2]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

HARDWARE · AFFILIATE LINKS

Hardware named on this page

NVIDIA Jetson AGX Thor Developer Kit Bundle at Seeed StudioNamed in NEO's specifications (Compute): Jetson Thor

Listed because this page names the model; being named is not evidence that a product is compatible with, or identical to, what a robot uses. Affiliate links: if you buy through one, Seeed Studio may pay WBH a commission, at no extra cost to you. It plays no part in what WBH covers or names. How recommendations are chosen.