COMPARISON · 5 SPECIFICATIONS

Booster T1 vs Unitree H2

Booster T1 (Booster Robotics) and Unitree H2 (Unitree Robotics) are both full-size humanoid robots. The table sets side by side the 5 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH · 26 OCT 2026

SIDE BY SIDE

Official source
Community measured
Not published

Open in the comparison tool to add, swap or remove robots, choose a configuration and see every specification they publish.

SPECIFICATION	Booster T1Booster Robotics Status: SHIPPING	Unitree H2Unitree Robotics Status: SHIPPING
Height	1.18 mOfficial source [1]	1.82 mOfficial source [2]
Weight	~30 kgOfficial source [1][3]	~70 kgOfficial source [2]
Degrees of Freedom	23 DoF · 31 DoF (With Gripper) · 41 DoF (With Dexterous Hand)Official source [1][3]	31Official source [2][4]
Runtime	2 h (walking)Official source [1][3]	~3 hOfficial source [2][4]
Battery	10.5 AhOfficial source [3]	15 Ah (0.972 kWh), quick-releaseOfficial source [2]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

HARDWARE · AFFILIATE LINKS

Hardware named on this page

NVIDIA Jetson AGX Thor Developer Kit Bundle at Seeed StudioNamed in Unitree H2's specifications (Compute): Jetson T5000

Listed because this page names the model; being named is not evidence that a product is compatible with, or identical to, what a robot uses. Affiliate links: if you buy through one, Seeed Studio may pay WBH a commission, at no extra cost to you. It plays no part in what WBH covers or names. How recommendations are chosen.