Skip to content
WE BUILDHUMANOIDS

COMPARISON · 4 SPECIFICATIONS

AGIBOT A3 vs PAL Robotics KANGAROO

AGIBOT A3 (AGIBOT) and PAL Robotics KANGAROO (PAL Robotics) are both full-size humanoid robots. The table sets side by side the 4 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH ·

SIDE BY SIDE

  • Official source
  • Community measured
  • Not published

Open in the comparison tool to add, swap or remove robots, choose a configuration and see every specification they publish.

SPECIFICATIONAGIBOT A3AGIBOT Status: SHIPPINGPAL Robotics KANGAROOPAL Robotics Status: SHIPPING
Height173 cmOfficial source [1]1.60 mOfficial source [2]
Weight55 kgOfficial source [1]50-65 kgOfficial source [2]
RuntimeUp to 10 h (maximum endurance)Official source [1]~3 h autonomyOfficial source [3]
BatteryDual battery packs, 1152 WhOfficial source [1]976 Wh (15 Ah, 63 V)Official source [2]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

IN SHORT

Which is taller, the AGIBOT A3 or the PAL Robotics KANGAROO?
The AGIBOT A3: 1.73 m, against 1.6 m for the PAL Robotics KANGAROO, as their makers publish them.

HARDWARE · AFFILIATE LINKS

Hardware named on this page

Listed because this page names the model; being named is not evidence that a product is compatible with, or identical to, what a robot uses. Affiliate links: if you buy through one, Seeed Studio may pay WBH a commission, at no extra cost to you. It plays no part in what WBH covers or names. How recommendations are chosen.