Skip to content
WE BUILDHUMANOIDS

COMPARISON · 4 SPECIFICATIONS

AGIBOT A3 vs Booster T1

AGIBOT A3 (AGIBOT) and Booster T1 (Booster Robotics) are both full-size humanoid robots. The table sets side by side the 4 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH ·

SIDE BY SIDE

  • Official source
  • Community measured
  • Not published

Open in the comparison tool to add, swap or remove robots, choose a configuration and see every specification they publish.

SPECIFICATIONAGIBOT A3AGIBOT Status: SHIPPINGBooster T1Booster Robotics Status: SHIPPING
Height173 cmOfficial source [1]1.18 mOfficial source [2]
Weight55 kgOfficial source [1]~30 kgOfficial source [2][3]
RuntimeUp to 10 h (maximum endurance)Official source [1]2 h (walking)Official source [2][3]
BatteryDual battery packs, 1152 WhOfficial source [1]10.5 AhOfficial source [3]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

IN SHORT

Which is taller, the AGIBOT A3 or the Booster T1?
The AGIBOT A3: 1.73 m, against 1.18 m for the Booster T1, as their makers publish them.
Which is heavier, the AGIBOT A3 or the Booster T1?
The AGIBOT A3: 55 kg, against ~30 kg for the Booster T1, as their makers publish them.