Skip to content
WE BUILDHUMANOIDS

COMPARISON · 7 SPECIFICATIONS

PAL Robotics KANGAROO vs Unitree R1

PAL Robotics KANGAROO (PAL Robotics) and Unitree R1 (Unitree Robotics) are both full-size humanoid robots. The table sets side by side the 7 specifications both manufacturers publish; each value is the maker's own, with its source, and a value either maker does not publish is not compared.

PUBLISHED BY WBH ·

SIDE BY SIDE

  • Official source
  • Community measured
  • Not published

Open in the comparison tool to add, swap or remove robots, choose a configuration and see every specification they publish.

SPECIFICATIONPAL Robotics KANGAROOPAL Robotics Status: SHIPPINGUnitree R1Unitree Robotics Status: SHIPPING
Height1.60 mOfficial source [1]1.23 mOfficial source [2]
Weight50-65 kgOfficial source [1]~27 kg (R1 AIR) · ~29 kg (R1) · ~29 kg (R1 EDU)Official source [2]
Degrees of freedom14-40 DOFOfficial source [1]20 (R1 AIR) · 26 (R1) · 26-40 (R1 EDU)Official source [2]
Runtime~3 h autonomyOfficial source [3]~1 hOfficial source [2]
Arm payload7 kg (4-DoF arm, single/extended) · 30 kg (4-DoF arm, bi-manual) · 5 kg (5-DoF arm, single/extended) · 28 kg (5-DoF arm, bi-manual) · 3 kg (7-DoF arm, single/extended) · 25 kg (7-DoF arm, bi-manual)Official source [1]~2 kgOfficial source [2]
Battery976 Wh (15 Ah, 63 V)Official source [1]Lithium battery, quick-releaseOfficial source [2]
Compute2x Intel i7 (32GB/1TB), optional NVIDIA Jetson GPU; Ubuntu LTS + ROS 2 LTSOfficial source [1]8-core processor; R1 EDU optional Orin (40-100 TOPS)Official source [2]

Each value is the one on the robot’s profile, with its source. Figures are as each manufacturer publishes them and may be measured differently; a value a manufacturer does not publish is shown as “Not published”, never estimated.

IN SHORT

Which is taller, the PAL Robotics KANGAROO or the Unitree R1?
The PAL Robotics KANGAROO: 1.6 m, against 1.23 m for the Unitree R1, as their makers publish them.

HARDWARE · AFFILIATE LINKS

Hardware named on this page

Listed because this page names the model; being named is not evidence that a product is compatible with, or identical to, what a robot uses. Affiliate links: if you buy through one, Seeed Studio may pay WBH a commission, at no extra cost to you. It plays no part in what WBH covers or names. How recommendations are chosen.